ΕΝΙΣΧΥΤΕΣ

ATC SIA2 150 ΟΛΟΚΛΗΡΩΜΕΝΟΣ ΕΝΙΣΧΥΤΗΣ .

9:32 π.μ. by http://www.nexusacoustics.com

ATC  SIA2 150  ΟΛΟΚΛΗΡΩΜΕΝΟΣ ΕΝΙΣΧΥΤΗΣ .

Mε  ο 2 x 150 Watt RMS / 8 Ω  o Ολοκληρωμενος Ενισχυτης της ATC με MOSFET ισχυος οδηγει ανετα και δυσκολα φορτια Ηχειων με ανεση και ποιοτητα . Τηλεχειριζομενος και πληρης εισοδων . Αριστη ποιοτητα κατασκευης απο την Εγγλεζικη ATC.

 Τιμη προσφορας  :  2.900 e

info:   xaitas1@gmail.com     WWW.NEXUSACOUSTICS.COM     210-9830207

2 x 150 Watt RMS / 8 Ω   MOSFET ισχυος .

Combining the discrete preamp circuits from the high-end SCA2 preamplifier and ATCs renowned MOSFET class A/B power amplifiers, the SIA2-150 offers power and precision to the discerning music fan who wants a simple all-analogue solution to drive their passive loudspeakers.     

Features 

  • 150 watts per channel.
  • Discrete MOSFET Class A/B output stages.
  • Discrete class-A low-noise input stages.
  • 5 x stereo RCA/Phono inputs. 
  • 3 x stereo RCA/Phono outputs (preamp, subwoofer and tape). 
  • Headphone amplifier.
  • IR Remote control.
  • Hand built in the UK & covered by a 6 year warranty.

Max Continuous Power Output: 150W (1% THD, 8 ohms, both channels driven) 
Frequency Response: < 2 Hz – > 280 kHz (-3dB)
THD: <0.0008% / 102dB (1kHz, 8 ohms, 1dB below full power) 
S+N/N Ratio: >112dB (IEC ‘A’) 
Crosstalk: >90dB (10Hz – 20kHz) 
Input sensitivity: 350mV (ref. 150W out) 
Analogue Inputs: 5 x stereo pairs via RCA/Phono  
Analogue Pre-Amp Outputs: 2 x stereo pairs via RCA/Phono 
Tape Output: 1 x stereo pair via RCA/Phono 
Headphone Amp Output: 1 x stereo via 6.35mm jack 
Dimensions: 142 x 453 x 346mm  (H x W x D inc. terminals)   
Weight: 18.3kg .
0 Comments

0 Σχόλια