LYRA `KLEOS ` MC ΚΕΦΑΛΗ
![]() |
LYRA `KLEOS ` MC ΚΕΦΑΛΗ
Μια φημισμενη κεφαλη Moving coil 0,5 mV ανταξια των καλυτερων Αναλογικων συστηματων & Step-up Transformers . Xειροποιητη κεφαλη με Line contact βελονα & platignum plated pins.
![]() |
Output Voltage: 0.5mV@5cm/sec
LYRA KLEOS Moving Coil Cartridge
Although many
MC cartridges have good performance, their sound is held back by how they are
designed. The problem is, the signal coils should have the same angle as the
magnetic circuit during playback, but MC cartridges are typically designed so
that the opposite happens - applying normal tracking force pushes the coils out
of alignment. This impairs coil sensitivity and linearity, and reduces sound
quality.
Lyra's "New
Angle" technology solves this fundamental problem by compensating for how
the signal coils are affected by vertical tracking forces, and optimally
aligning the coils when it matters most - during playback. Introduced on our
entry-level Delos, the New Angle technology enables the Delos to perform well
above its pricepoint.
But being
audiophiles, Lyra wanted to achieve the next higher level - which is the new
Kleos. Building on New Angle technology, the Kleos innovates with a stronger
chassis machined from aircraft-grade alloys, narrowed mounting area to improve
energy transfer, and pre-stressed construction combining multiple materials
with non-parallel surfaces to inhibit internal body resonances. The fully
hand-made Kleos also has a Lyra-designed line contact stylus and
platinum-plated output pins, achieving an exceptionally quiet noise-floor with
superior immediacy, resolution and tracking, wide dynamic range and explosive
transients, plus a warmer and natural tonal balance. The Kleos is a high-value
cartridge that surpasses the sound quality of substantially more expensive
cartridges.
Let the Lyra Kleos
show you how good a New Angle on LP reproduction - Level 2 - can sound.
Specifications
- Type: Medium
Weight, Medium Compliance, Low-Impedance Moving Coil Cartridge
- Stylus:
Lyra-Designed Long-Footprint Variable-Radius, Line-Contact Nude Diamond (3um x
70um), Slot-Mounted
- Cantilever
System: Solid Boron Rod with Short One-Point Wire Suspension, Directly Mounted
into Cartridge Body
- Coils: 2-Layer
Deep, 6N High Purity Copper, Square-Shaped Chemically-Purified High-Purity Iron
Former, 5.4 ohms Self-Impedance, 9.0uH Inductance
- Output Voltage:
0.5mV@5cm/sec., zero to peak, 45 Degrees (CBS Test Record, Other Test Records
May Alter Results)
- Frequency Range:
10Hz - 50kHz
- Channel
Separation: 35dB or Better at 1kHz
- Cartridge Weight:
8.8g
- Recommended
Tracking Force: 1.65g - 1.75g
0 Σχόλια